This study reports a protocol for the treatment of a sanitary landfill leachate through integration between a stage of coagulation-flocculation, a step of filtration of the resulting suspension, and application of the photo-Fenton process using a ferrioxalate complex and solar irradiation. The best results for turbidity removal by coagulation-flocculation were reached using Al3+ as nitrate salt mainly using concentrations up close 4.4 mmol L-1, at the natural pH of the effluent (pH 7.9), when the removal of 66% of the turbidity was achieved. By using a ferrioxalate complex after adjusting the pH of the effluent to 5, it was possible to circumvent the classical limitations of the Fenton process (related to the pH of the medium limited to between 2.5 and 3.0), performing a removal of 68% of the remaining dissolved organic carbon. The global dissolved organic carbon removal in this process was of 86% after a membrane filtration step before the photo-Fenton process.

Many studies have reported significant improvements in the photocatalytic degradation capacity of TiO2 immobilized in carbonaceous materials, mainly due to a well-characterized synergistic effect. The photocatalytic degradation of the estrogens 17β-estradiol and 17α-ethynylestradiol was evaluated using 1 mg L-1 aqueous solutions, employing a nanocomposite containing TiO2 and activated carbon (TiO2-AC) prepared by sol-gel technique. The synthesized materials were characterized by thermogravimetric analysis (TGA), X-ray diffraction (XRD), Raman spectroscopy and scanning electron microscopy (SEM). These techniques allowed to estimate the carbon proportion (11.4 wt.%), the phase composition (anatase: 80.2%, brookite: 14.0%, and rutile: 5.8%) and the superficial morphology. Using UV-A radiation provided by a high pressure mercury vapor lamp (125 W) and the synthesized photocatalysts, it was observed the almost complete removal of both estrogens in times shorter than 10 minutes. Considering the similarity between the degradation percentage of nanocomposites (TiO2 and TiO2-AC), no synergistic effects between AC and TiO2 could be assumed.

In this work the sol-gel method was used to synthesize a nanocomposite containing TiO2 and graphene oxide (GO). The photocatalytic activity of the TiO2/GO nanocomposite was evaluated regarding the degradation of a reactive dye (reactive black 5) in aqueous solution using processes assisted by UV-A radiation. Under these conditions the nanocomposite showed higher degradation efficiency than the reference photocatalyst (Degussa P25 TiO2), mainly due to the high degradation capacity of the synthesized TiO2 nanoparticles. Although contradictory to several reports in the specialized literature, no synergistic effect was observed between the nanocomposite components.